Design and map
In Arta Sazeh Arshin complex, power distribution bases are designed by using skilled engineers according to the standards and specifications of Iraq.
Distribution is the final stage of power delivery, transferring electricity from the transmission system to the individual consumer. Reduce the use of transformers and bring the voltage to the operating voltage. Power distribution lines are made in several categories.
In order to produce Arta Sazeh Arshin Company, all kinds of lattice and circular bases in lengths of 9, 11 and 12 meters are made.
Mesh
They are bases with metal structure that are usually made in 9, 11, 12 and 14 meters lengths of IPE and IPN beams (in sizes 120, 140 and 200) and corners and are used as power distribution bases to They work.
Circular
Tube bases that are usually made in lengths of 9, 11 and 15 meters in the form of hot press and flange and sheets in standard thicknesses (Iraqi spec).
Innovation in design, quality assurance
Power distribution lines are generally installed on the bases everywhere. The forces applied to the body of a base are: vertical forces due to the weight of the wire, the ice layer around the wire, fittings, insulators, consoles and The base itself and the horizontal force applied to it near the base of the base and is mostly due to wire tension, wind pressure and forces due to the weight of the conductors and as a result non-uniform distance between the bases and the angle of deviation of the line. It must withstand all these loads easily and with complete confidence.
Production and galvanizing
Production of circular force distribution bases, pipes are made of sheets in different diameters and then the cylinders are connected by hot pressing method and are prepared for galvanizing.
Photo Gallery
Photo gallery related to power transmission projects
